不銹鋼材質的板1.4313是馬氏體級，耐蝕化高朝，熱整理后耐久力性好。X3CrNiMo13-4鋼的物理性能方面參數是由化學上含鐵中鉬和鎳的高含鐵。此類合金屬加入劑要求了加入級碳含鐵的需用——給定滲透壓比較于奧氏體不銹鋼材質的板。也許鎳含鐵低，但鎳含鐵約為4%，重要升高了鋼對所有蝕化自然自然環境的忍受力——二級物理性能方面參數。X3CrNiMo13-4鋼顧客可分娩高達hg300℃在熱度下崗位的組件和組件，包括曝露自己在所有蝕化自然自然環境中的組件，同時持續一定的從表面環境括抗氯化物質地)。QT650.QT780和QT900環境下，熱整理后通常交給鋼管。半的成品中用資源分娩.所有.在冶金工程和資源餐飲行業，鍋輪機曝露自己在高和氣溫度低下.泵.收縮機主件。鋼不適應合對接焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50制造EN1.4313馬氏體不銹鋼裝飾管更具固溶處理屬性（+A）狀態下、高頻淬火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，應該哪個有一定要跟銷售業務說清理哦。